Tyres significantly influence how your Maruti Suzuki Baleno performs in terms of riding, braking, steering and fuel economy. Therefore, it is important to select the proper replacement tyre with more factors to consider than just matching tyre diameter. The width, aspect ratios, load index and speed rating of the tyre also have to be right.
The current Baleno is sold with two factory tyre sizes. Sigma and Delta variants use 185/65 R15 tyres, while Zeta and Alpha variants use wider 195/55 R16 tyres. Owners of older or used Balenos should confirm the specification on their own car because tyre and wheel combinations can differ by generation, variant and previous modifications.
This guide contains Baleno tyre dimensions, recommended pressures, spare tyre specifications, average replacement costs and safe tyre upsizing.
Table of Contents
Maruti Suzuki Baleno Tyre Size at a Glance
| Baleno variant | Factory tyre size | Wheel type |
| Sigma | 185/65 R15 | 15-inch steel wheel |
| Delta | 185/65 R15 | 15-inch steel wheel |
| Zeta | 195/55 R16 | 16-inch alloy wheel |
| Alpha | 195/55 R16 | 16-inch alloy wheel |
| Spare wheel | 185/65 R15 | 15-inch steel wheel |
Note that the sizes used here are for the current-gen Baleno model. The same variants apply to the petrol, AMT and factory-fitted CNG versions. For instance, the Delta CNG has a 15-inch tyre while the Zeta CNG has a 16-inch tyre.
Baleno Tyre Size by Variant
Baleno Sigma and Delta Tyre Size
The Sigma and Delta variants use 185/65 R15 tyres. Their taller sidewalls provide more cushioning between the road and wheel, helping absorb potholes, expansion joints and uneven surfaces.
This setup is suitable for city driving where the characteristics of comfort and durability matter more than the steering response. It is also noteworthy that 15-inch tyres can generally be less expensive to replace compared to 16-inch tyres with lower profiles.
Baleno Zeta and Alpha Tyre Size
The Zeta and Alpha use 195/55 R16 tyres with alloy wheels. These tyres are 10 mm wider and have a lower sidewall profile.
The combination will provide a more direct steering experience compared to the other options and an overall sporty look to the higher variants. However, the shorter sidewall means that it will transmit bumps on the road more, and could be more susceptible to damage caused by potholes.
A wider tyre does not automatically guarantee better grip. Wet braking and road holding also depend on the compound, tread pattern, inflation pressure, tread depth and tyre condition.
Tyre Sizes on Older and Used Balenos
The current table should not be applied without discrimination in the case of every Baleno. The first-generation Baleno was sold from 2015 until 2022 in petrol, diesel, and RS versions, and the equipment kept changing throughout the years.
Many older variants also used 185/65 R15 or 195/55 R16 tyres, but confirm the specification on the individual car. A previous owner may have fitted aftermarket wheels or a non-standard tyre size.
Go through the door label on the driver’s side, the manual, the sidewall description, and the original specification to confirm the tyre size. The same type and model of tyre should be fitted on the same axle of the vehicle.
How to Read a Baleno Tyre Code
Consider the marking 195/55 R16 87V.
| Marking | Meaning |
| 195 | Tyre width in millimetres |
| 55 | Sidewall height as a percentage of width |
| R | Radial construction |
| 16 | Wheel diameter in inches |
| 87 | Load index |
| V | Speed rating |
Load index gives information about the maximum load the tyre is able to carry. Speed index denotes the capacity of the tyre to provide high speed in certain conditions.
When replacing tyres, do not look only at the first three measurements. The new tyre should also meet or exceed the load index and speed rating required for the Baleno variant.
The tyre sidewall carries a code that contains information about the manufacturing time – the last digits of the code indicate the year and week of tyre manufacturing. For example, if you see 2425, it means the tyre was produced in the week 24 of the year 2025.
Also Read: Car tyre Maintenance Tips and Guide
What Is the Correct Baleno Tyre Pressure?
For the current Baleno on factory-size tyres, 29 PSI when cold is the commonly recommended normal pressure for all four tyres. However, confirm the correct figure on the driver-side door label or in the owner’s manual.
The pressure recommended may differ depending on the car generation, tyre dimension, loading, and the wheels you install on the car. Be careful when using the maximum pressure indicated on the sidewall of the tyre. It is not the pressure that should be applied regularly but simply the maximum limit determined for the tyre.
How and When to Check Tyre Pressure
Check pressure when the tyres are cold, ideally after the car has been parked for at least three hours or driven only a short distance.
The pressure of tyres increases when the tyres get hot. Therefore, don’t let air out of the hot tyre just because the pressure exceeds the recommendations for cold tyres.
Check all four tyres and the spare every two weeks and before long journeys. Repeated pressure loss can indicate a puncture, damaged valve, bent wheel or bead leak and should be inspected rather than repeatedly topped up.
Baleno Spare Tyre Size
The current Baleno comes with a 185/65 R15 spare tyre mounted on a steel wheel.
The Sigma and Delta variants are outfitted with tyres that conform to the standard size for road tyres. The Zeta and Alpha models are fitted with 195/55 R16 tyres, but they come with a spare tyre that measures 185/65 R15. The dimensions of both types are fairly comparable, as their rolling diameters are the same even though the spare has a smaller tyre and is fitted with a steel wheel.
The spare should not automatically be described as a compact or space-saver tyre. Follow the speed, distance and pressure instructions printed on it or given in the owner’s manual.
Always check the spare tyre for any changes in pressure, age, and condition even if it was never put to use. Also check for the availability of both the wheel spanner and jack.
Used Maruti Suzuki Baleno Cars
Maruti Baleno Tyre Price in India
Prices vary by brand, tyre model, manufacturing date, load and speed rating, city and seller. As a broad July 2026 estimate:
| Baleno tyre size | Approximate price per tyre |
| 185/65 R15 | ₹4,500 to ₹8,500 |
| 195/55 R16 | ₹5,000 to ₹10,500 |
For premium tyres, wet grip might be given higher priority than comfort, road noise, or speed stability. However, just because a tyre costs more than others, it doesn’t mean this model will suit everyone.
Ask for the complete installed cost because balancing, alignment, valve replacement and fitting may be billed separately. Also check the manufacturing date before purchase. A large discount is less attractive if the tyre has been stored for several years.
How to Choose the Right Replacement Tyre
The right tyre depends on how and where you drive.
| Driving priority | What to look for |
| City comfort | Compliant ride, low road noise and pothole cushioning |
| Highway use | Stable braking, wet grip and the correct speed rating |
| Broken roads | Strong sidewalls and good impact resistance |
| High annual running | Durability, even wear and wide dealer support |
| Monsoon use | Effective water evacuation and healthy tread depth |
| Budget replacement | Correct specification from a recognised manufacturer |
Without declaring any one tyre as an ultimate solution for all owners of Baleno, it is best to compare different possible options in the most widely chosen sizes. Availability can differ between the 185/65 R15 and 195/55 R16 variants even within the same tyre line.
When Should Baleno Tyres Be Replaced?
Experts have indicated that there is no particular age or distance after which tyres can be classified as ‘safe’. The decision whether or not to replace a tyre depends on several factors including tyre tread depth, damage, rubber quality, and operating conditions.
Replace or professionally inspect a tyre when:
- Tread reaches the wear indicators or 1.6 mm
- The sidewall develops a bulge, deep cut or severe cracking
- Cords become visible
- The tyre repeatedly loses pressure
- It has been driven while flat
- Tread wear becomes seriously uneven
- Vibration continues after balancing
- A tyre professional finds internal or impact damage
Tyres should be checked at least once every half-year. This is required even if the tyre appears perfectly good – even a spare tyre may get damaged as a result of ageing or sunlight impact.
Use the moulded tread-wear indicators or a tread-depth gauge. A coin test is only a rough check and should not decide whether a tyre remains safe.
Also Read: Types of tyres
Tyre Rotation, Alignment and Balancing
Regular maintenance helps tyres wear more evenly.
Make sure you follow the manufacturer recommendations concerning the intervals and methods of tyre rotation. The process should also depend on whether traction is achieved by means of using directional or non-directional tyres.
Check wheel alignment when the car pulls to one side, the steering wheel sits off-centre, the tyres wear unevenly, or the car hits a large pothole or kerb. Do not wait for a fixed kilometre interval when these symptoms appear.
It is important to check the balance whenever tyres are installed, repaired, or rotated and when driving is accompanied by any vibrations. The rotation does not eliminate anomalies caused by incorrect alignment, bad suspension and constant under-inflation.\
Also Read: How to choose the right tyre for your car
Can You Upsize Baleno Tyres?
Maruti Suzuki officially lists 185/65 R15 and 195/55 R16 for the current Baleno. Alternative sizes such as 195/60 R15 or 205/50 R16 may be suggested by aftermarket sellers, but they should not be called manufacturer-approved unless Maruti confirms them for the particular car.
Keeping the factory tyre size is usually the safest option. Upsizing can affect:
- Steering effort and ride comfort
- Fuel efficiency
- Speedometer and odometer accuracy
- Suspension and steering clearance
- Braking behaviour
- Insurance or warranty assessments
It is not enough to observe the diameter index. Parameters such as width, offset, load index, speed rating and clearance with passengers and luggage are also important.
Consult an authorised Maruti Suzuki workshop and a qualified tyre professional before changing tyre or wheel size.
What to Check on a Used Baleno
Tyres can reveal how a used car has been maintained. Check:
- Correct size on all four wheels
- Matching tyres on each axle
- Tread depth and manufacturing dates
- Cracks, bulges, cuts and sidewall repairs
- Uneven shoulder or centre wear
- Bent, cracked or welded wheels
- Missing or damaged wheel nuts
- Spare tyre age, pressure and condition
- Signs of rubbing after an incorrect upsize
During the test drive, it is imperative to look out for steering pull, vibration, wheel balance issues, too much noise from the tyre, or the lack of stability in braking. Uneven wear of the tyres indicates that the alignment or suspension could also be an issue and not just the tyre.
Four recently fitted tyres do not automatically mean the car is problem-free. Check why they were replaced and whether any underlying fault was repaired.
Related Blogs:
Maruti Suzuki Swift Tyre Guide: Size, Price & Recommended Pressure
Maruti Suzuki Brezza Tyre: Size, Price, Recommended Pressure
FAQs
Q1. What is the Baleno Sigma tyre size?
The current Baleno Sigma uses 185/65 R15 tyres with 15-inch steel wheels.
Q2. What is the Baleno Delta tyre size?
The current Baleno Delta also uses 185/65 R15 tyres with 15-inch steel wheels.
Q3. What is the Baleno Zeta tyre size?
The Baleno Zeta uses 195/55 R16 tyres with 16-inch alloy wheels.
Q4. What is the Baleno Alpha tyre size?
The Baleno Alpha uses 195/55 R16 tyres with 16-inch alloy wheels.
Q5. What is the recommended Baleno tyre pressure?
For the current model, 29 PSI when cold is the commonly recommended normal pressure. Confirm the exact figure on the door label or in the owner’s manual.
Q6. What is the Baleno spare tyre size?
The current Baleno uses a 185/65 R15 spare tyre on a steel wheel across the range.
Q7. Can Baleno Sigma use zeta or alpha alloy wheels?
A conversion may be possible, but the wheel width, offset, load rating, tyre specification and clearance must be checked. Consult Maruti Suzuki before making the change.
Q8. Should all four Baleno tyres be replaced together?
Replacing all four provides the most consistent grip and handling. If only two need replacement, use matching tyres on the same axle and ask a tyre professional about the safest placement.
Q9. Can different tyre brands be mixed?
It is best to use the same tyre model on all four wheels. At minimum, tyres on the same axle should match in size, construction and similar wear.
Q10. When should Baleno tyres be replaced?
Replace them when they reach the tread-wear indicators, develop serious damage, wear unevenly beyond correction or exceed the tyre manufacturer’s safe age guidance.





